Docol 500HE High Edge Ductility Steel (HE)

Docol 500HE: Docol HR500Y550T HE is the next generation of hot-rolled high-strength low-alloy steels with improved local formability, resulting in higher edge ductility and better trim quality. Docol HR460Y520T is produced using a new and closely controlled method. The structure is very fine. It is an extremely pure material that greatly improves local formability while still maintaining good overall formability. It is suitable for stamping most geometries and has excellent performance in applications where cutting edge quality affects forming feasibility. Compared with the traditional HSLA grade, the quality of trimming obtained by this new method of producing Docol HR500Y550T HE has been improved. The steel can meet the requirements of mold adjustment and wear resistance well, so it is especially suitable for precision blanking.

Docol 600CP Complex Phase Steel (CP)

Docol 600CP: Hot-dip layered steel for light vehicles. Docl 600CP is a steel for complex shapes that absorbs energy and is resistant to corrosion. Examples of applications include complex body-in-white (BIW) and other automotive components. The galvanic corrosion protection of these zinc-based coated products makes them the component of choice for wet areas.

Docol 800CP Complex Phase Steel (CP)

Docol 800CP: Docol 800CP is designed for applications requiring high structural strength and energy absorption, and is suitable for cold-formed safety components and collision-related equipment in the automotive and transportation industries.

Docol 1000CP Complex Phase Steel (CP)

Docol 1000CP: Docol 1000CP is specially developed for cold forming and can be used in applications with high strength and small bending radius. These steels are characterized by a combination of high yield strength and better cleanliness, which allows them to have smaller bending radii.

Docol 1200CP Complex Phase Steel (CP)

Docol 1200CP: Docol 1200CP multiphase steel was developed to increase automotive safety. Its ultra-high strength and improved formability make it possible to reduce weight in BIW applications. This steel undergoes a special heat treatment in a continuous annealing line to produce a multiphase structure.

Docol PHS 1500M Hot Formed Steel (PHS)

Docol PHS 1500M: Steel for the automotive industry can be supplied in the form of hot rolled steel and cold steel. Docl PHS1500 steel is developed for parts made by direct or indirect hot forming. Applications include safety parts such as door anti-collision beams, bumper systems, and B- pillar reinforcements.

Docol PHS 1800M Hot Formed Steel (PHS)

Docol PHS 1800M: Docol PHS1800 cold steel with a small amount of boron in the alloy to improve hardness. This steel is specially developed for parts manufactured by direct or indirect hot forming. Applications include safety parts such as door anti-collision beams, bumper systems, and B- pillar reinforcements.

Docol PHS CR2000 Hot-Formed Steel (PHS)

Docol PHS CR2000: Boron steel for the automotive industry Docol PHS CR2000 steel is optimized for parts made by direct or indirect hot forming. Applications include safety parts such as door anti-collision beams, bumper systems, and B- pillar reinforcements.

Docol 900M Martensitic Steels (MS)

Docol 900M martensitic steel helps improve collision resistance and provides reliable guarantees for lightweight design and cost-effective production in the automotive industry. Docol is one of the cold-rolled high-strength steels on the market and has become an ideal material for applications such as side impact beams, bumpers, and structural components in the automotive industry.