Incoloy 925 Coil

925 alloy is a nickel-chromium-molybdenum alloy designed to resist extreme corrosion conditions, pitting and crevice corrosion. This nickel steel alloy also exhibits unusually high recovery, tensile and creep rupture properties at elevated temperatures. These nickel alloys have long-term use from low temperatures to 1200 °F. A recognized component of the 925 composition of Inconel is the expansion of niobium to achieve age hardening, thereby annealing and welding during heating and cooling without unconstrained hardening. The expansion of niobium works with molybdenum to harden the alloy matrix and achieve high strength without strengthening heat treatment. Other well-known nickel-chromium alloys are age-hardened by the expansion of aluminum and titanium. This nickel steel alloy is quickly formed and can be welded in an annealed or precipitation (age) hardened condition.

Monel 400 Coil

It is a nickel-copper alloy (about 67% nickel-23% copper) that is resistant to seawater and steam at high temperatures, as well as to salt and corrosive solutions. Monel is 400 a solid solution alloy that must be hardened by cold working. These nickel alloys have good corrosion resistance, good weldability and high strength.

Monel R-405 Coil

Monel R-405 is a free-processed form of Monel 400. It is a nickel-copper alloy with a certain amount of sulfur added to produce sulfide inclusions, which play a role in chip breaking during processing. Like Monel 400, R-405 alloy is resistant to seawater and steam at high temperatures, as well as to salt and corrosive solutions. Monel R405 is a solid solution alloy that must be hardened by cold working. This nickel alloy has good corrosion resistance, good weldability and high strength. Its low corrosion rate in fast-flowing harsh environments or seawater, its amazing resistance to stress corrosion cracking in many fresh waters, and its ability to resist a variety of corrosion conditions have prompted its widespread use in other non-oxidizing chloride solutions and marine applications.

Monel K-500 Coil

Monel K-500 is a precipitation-hardenable nickel-copper alloy, which consolidates the excellent corrosion resistance of Monel 400 and has more noteworthy strength and hardness. These strengthening properties, strength and hardness are obtained by the addition of aluminum and titanium in the nickel-copper matrix, and by a heat treatment for shock precipitation, commonly referred to as age hardening or aging. In the age-hardened condition, Monel K-500 have a more pronounced tendency to stress corrosion cracking with less than Monel 400. Alloy K-500 has approximately three times the yield strength and twice the tensile strength as compared to Alloy 400.

Nickel Alloy 200 Coil

The alloy 200 is a forged, economically pure nickel with a carbon content of 0.15 percent. This alloy has extremely tough mechanical properties over a wide temperature range. It has corrosion resistance at neutral to moderately reduced conditions. The nickel 200 is ferromagnetic. Compared with nickel-based alloys, low-alloy and stainless steel, it has high thermal and electrical conductivity. Nickel 200 is not recommended for processes above 600 °F(316°C) because its long-term exposure in the 800 °F to 1200 °F range can cause precipitation of carbonaceous phases and loss of ductility.

Nickel Alloy 201 Coil

The alloy 201 is a forged, economically pure nickel with a carbon content of 0.02 percent. This has extremely tough mechanical properties over a wide temperature range. It has corrosion resistance at neutral to moderately reduced conditions. The nickel 201 is ferromagnetic. Compared with nickel-based alloys, stainless steels and low alloys, it has high thermal and electrical conductivity. Due to the low carbon content of nickel 201 (up to 0.02%), nickel 201 may be considered in processes above 600 °F(316°C), and alloy 200 with higher carbon content are not recommended.

Titanium Alloy Grade 2 Coil

Grade 2 titanium is one of the important titanium grades used in condenser pipes, heat exchangers, offshore oil installation water pipelines, and paper industry bleaching plants. This grade can be used for parts requiring strength up to 400 °F and oxidation resistance up to 600 °F. Grade 2 titanium is commercially pure titanium, which is slightly stronger than grade 1 titanium, but has equivalent corrosion resistance for most applications.

Titanium Alloy Grade 5 Ti 6Al-4V Coil

Grade 5 titanium is commonly used worldwide and in oil fields. The availability of alpha-beta grades is great, and titanium grades are heavily used. Titanium Grade 5 is alloyed titanium and is treated as an alpha-beta alloy. Grade 5 titanium is alloyed with 6% aluminum and 4% vanadium, also known as Ti 6Al-4V.

Titanium Alloy Grade 9 Coil

Grade 9 titanium alloy is a low-alloyed near-alpha titanium alloy with a nominal composition of Ti-3Al-2.5V. It is used for the application and development of cold-worked pipes. It has good cold formability and welding performance, and its room temperature strength is 20% higher than that of industrial pure titanium.% ~ 50%, it has good corrosion resistance in a variety of media. Gr9 alloy has better welding performance and cold forming performance than TC4 alloy.